Results 1 to 6 of 6

Thread: Idle suddenly drops when I come to a stop.

  1. #1

    Default Idle suddenly drops when I come to a stop.

    IAC is at 0% while I'm off the throttle and approaching a stop light, then as soon as I stop, the idle drops and IAC Position goes to 90%. Does anyone know what's going on with that?

  2. #2

    Default

    Probably need to tweak your IAC Ramp Down settings. A datalog would be very helpful to look at if you've recorded the event.

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,132

    Default

    Read 8th paragraph: http://forums.holley.com/showthread....2523#post62523 (Holley EFI Tuning Tips & Information)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #4

    Default

    Quote Originally Posted by Frankinstienracer View Post
    IAC is at 0% while I'm off the throttle and approaching a stop light, then as soon as I stop, the idle drops and IAC Position goes to 90%. Does anyone know what's going on with that?
    IAC should not be 0% when you're off the throttle. You have something programmed wrong.

  5. #5
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    1,331

    Default

    An engine needs fuel, air & spark to run. You need to figure out what it's not getting. Datalog the event.

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,132

    Default

    Originally Posted by Danny Cabral
    Quick Datalogger Information:
    Always provide data, not just symptoms. Is the AFR & ignition timing optimized? Overlay the datalog onto your Global File.
    Ensure the Target A/F Ratio table is properly programmed for your engine. Ensure the ECU is "Learning" (Learn Table LINK).
    Scroll through the datalog to the problem area. Then look exactly where this happens on the Base Fuel & Timing Tables. Scrutinize:
    RPM, MAP, MAT, TPS, CTS, IAC, Target AFR, AFR Left, CL Comp, Ignition Timing, Duty Cycle, Fuel Flow, Fuel Pressure & Battery.

    Using the Holley EFI software (LINK), look at where the live cursor moves to during this occurrence, and
    manually tune that area of the Base Fuel Table (enrich or lean) & Base Timing Table (optimize ignition timing).


    I find the most helpful datalog function, is overlaying the datalog on your Global File.
    I'm in the habit of using the datalog Overlay feature every time I review a datalog.
    Click on "Datalog" (on the top Toolbar), "Activate Overlay", then "Open Data Log".
    You can literally "playback" a recorded event, and watch it as it happened on any screen.
    Minimize (shrink) the datalog window, and move it to the bottom of any Global File screen.
    Then click & scroll anywhere on the datalog, and watch it playback on your Global File (EFI software).
    http://documents.holley.com/techlibr...9r10543rev.pdf (Holley EFI Datalogger Instructions)
    https://forums.holley.com/showthread...s-amp-Datalogs (Datalog & System Log Information - Read "NOTES")
    https://www.youtube.com/watch?v=iqHO...C6FEA0BB99AF17 (How To Record & Email A Datalog)
    https://www.youtube.com/watch?v=q7OZUXLRS1Q (How To Record A System Log & Diagnose A No-Start Condition)
    https://forums.holley.com/showthread...7531#post77531 (Closed Loop Datalog Tuning - Posts #2, #4 & #6)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us