Results 1 to 2 of 2

Thread: Engine Won't Run Right

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Engine Won't Run Right

    Hey everyone. I'm having a problem here. I'm not sure I can verify it's with the Dominator, but here's where I'm at so far. Bowtie V6 (block and heads) Custom Cam, 76mm turbo, 160 lb/hr injectors, HEI style distributor (MSD but stock like for '92 Typhoon), MSD wires, NGK TR5 plugs, E85.

    Problem is as such. Engine can be hard to start, not too worried about that as I haven't really started tuning yet. I'm using a tune from a fellow SYTY guy that has a pretty similar build. It has to warm up to run better. Anyway, if I mash on the throttle in Park, it revs lazily and vibrates badly at 3K RPM & up. It is a solid roller engine FYI, if that matters. When I drive the truck it runs but rough, not rough as in it can't get around, but no real performance and sloppy. Tach does not bounce (on SYTYs usually indicates an ignition issue).

    What I've done for troubleshooting so far: Check plugs & wires, plugs all look good except for one thing, all of the driver side plugs have no coloring on the thread landing, the passenger side plugs do. Nothing bad, no build up, just a discoloration (a blackish color like soot, but there's no soot). I went ahead and did a compression check, 152 psi on every cylinder. I then used a node light to verify injectors are firing, all good there. Pulled one plug wire at a time to see if one had no change, they all had a good RPM drop. Last thing, I tried my 80 lb/hr injectors, no dice, still runs exactly the same. Does anyone have any thoughts on this?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,345

    Default

    http://forums.holley.com/showthread....ents-Read-This (Initial Checks & Adjustments - Read Steps #1-#6!)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, 100HP progressive dry direct-port NOS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, 160A 3G alternator, Optima Red battery, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us