Well, after many issues over the past months with my Holley EFI system, I finally thought I had everything running good again, until I tried revving my car from idle only to hit rev limiter at around 2400 RPM? I disabled all rev limiters and car still will not rev past 2400 RPM or so. Any ideas?

UPDATE: I may have figured it out. It appears that my Dome Pressure was showing a HI Error, which was set to cut ignition. I'm currently not using the Boost ICF, but somehow the Dome Pressure was active and must have been reading off the charts! I disabled the Dome Pressure and will update the ECU tomorrow and see if this fixed it.