Results 1 to 2 of 2

Thread: Holley 600 vacuum issue cannot figure out.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Holley 600 vacuum issue cannot figure out.

    327 SBC with a 1850 600 Holley. No Vacuum on the Metering block at idle and the car idles with the Idle screws all the way in, throttle screw all the way out and adjusted Floats. Currently had a 6.5 power valve and 65 jets. Also has a pretty mild RV Cam. Also has no Vacuum issues at the Throttle body. Very rich, in my garage, so gets hard to breath in there even with the door open. Any help greatly appreciated.

  2. #2
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,591

    Default

    Where is the engine getting the air from? I'd check the secondary throttle shaft is returning to the throttle stop, and not sticking partly open. If you're using a thick base gasket, then the throttle body can warp enough for the secondary shaft to bind. And you don't get vacuum on the metering block until some time after the primary side exposes the ported vacuum takeoff in the throttle body. That nipple is ported vacuum, not manifold vacuum. Gary
    Last edited by Gaz64; 05-31-2019 at 04:48 AM.
    Regards, Gary

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us