Results 1 to 3 of 3

Thread: 4 Cylinder Clarification on Injector Strategy

  1. #1

    Default 4 Cylinder Clarification on Injector Strategy

    My setup: Holley HP on 4 cylinder motorcycle 12-1 crank wheel and no cam sync (35 year old engine design). Firing order is 1-2-4-3. Reading “Fuel Injector Information - Strategy” in the Help guide. Can I assume the descriptions given are specific to 8 cylinder engines? And for a 4 cylinder engine I would double the crankshaft degrees listed? For a 4 cylinder:
    Bank to Bank - Would fire half the injectors and then the other half every 360° (1 & 4 inject at 0° and 540°, 2 & 3 inject at 360° & 720°.)
    Untimed Sequential - Would fire each injector every 180° (1 injects at 0°, 2 injects at 180°, 4 at 540°, and 3 at 720° **OR** 4 at 0°, 3 at 180, 1 at 540° and 2 at 720° — just depends on where the cam is the first time the crankshaft comes around?)
    Paired - Would fire a pair of cylinders every 180° (1 & 4 inject at 0° & 360° and 2 & 3 inject at 180° & 540°)
    To run paired, I have to wire the injectors in pairs? Injector 1 output to both cylinders 1 & 4 and injector 2 output to cylinders 2 & 3? (And leave injector outputs 3 & 4 unconnected.)
    Thanks! All the other questions I’ve had, have been covered in the forum, just a little confused on this one (mostly caused by my experience with other ECUs we’ve used on the bike prior).

  2. #2

    Default

    You need to wire 4 injectors to 4 outputs.
    Full body, full frame, laddered RWD Honda Civic.

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,804

    Default

    In the Holley EFI software, see the "View Injectors" screen in the Pin Map for ECU connector & pin-out. This indicates the injector drivers (A-H), and which J1 Connector pin they're wired to.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us