Results 1 to 4 of 4

Thread: HP/Holley Dual Sync/MSD 6AL-2 Combo Wiring Diagram?

  1. #1

    Default HP/Holley Dual Sync/MSD 6AL-2 Combo Wiring Diagram?

    On my 'scratch-build' (no OEM stuff) E85 powered, N/A big block Ford street rod with the Holley HP ECU (554-113), I'm using the Holley 558-508 main harness, Holley 565-210 Dual Sync distributor, and sensor numbers 554-101, 534-20, 534-10, 554-102, 554-103. Also using MSD 6421 6AL-2 & MSD 8253 HVC-2 coil. I've looked through all the available diagrams and can't determine which would be closest to my combination. Could someone help me out with that? Both I & my engine builder have limited experience with Holley EFI.

  2. #2

    Default

    Schematic 271R960A-1 is what matches the 558-508 harness. The basic wiring is all the same, and pretty easy, since you already have a dual sync distributor.
    Click image for larger version. 

Name:	271r960a-1.jpg 
Views:	28 
Size:	98.3 KB 
ID:	8208

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,398

    Default

    Originally Posted by Danny Cabral
    FYI: Holley EFI now sells their own Dual Sync Hall-Effect distributors (LINK).
    They're a small cap design, "plug & play" with Holley EFI, and no need for a modified Firing Order.
    The crank & cam sensor signals also provide sequential injection capability (MPFI applications).
    It's "plug & play" (into the 10-pin ignition connector on the EFI Main Harness) and requires a CD
    ignition box (Instructions). The MSD 6201 Digital 6A CDI box & 8253 HVC-2 coil are a great match.
    The MSD CD ignition box is wired as shown in the Holley EFI Wiring Manual:
    http://documents.holley.com/techlibr...10555rev17.pdf (Holley EFI Wiring Manual - Figure 11, Page 20)
    https://www.youtube.com/watch?v=AM7r-DauCak (Holley EFI Dual Sync Distributor - YouTube Tech Video)
    A blank cap (LINK) is available, if the user decides to convert to Coil-Near-Plug/DIS later (no CDI box).
    Of course, this component can also be used as a crank and/or cam sync/oil pump drive unit.

    The Custom Ignition Parameters (in System Parameters) for the Holley EFI Dual Sync Distributor:
    Ignition Type ............. ― "Custom"
    Crank Sensor Type ..... ― "1 Pulse/Fire"
    Sensor Type .............. ― "Digital Falling"
    Inductive Delay .......... ― "100.0 usec" ( Synchronization info, adjusted per application.)
    Ignition Reference Angle ― "50°" ( Inherent rotor-phasing of this unit.)
    Cam Sensor Type ........ ― "Single Pulse" ( "Not Used" for TBI, unless CNP ignition.)
    Sensor Type .............. ― "Digital Falling"
    Output Setup Type ..... ― "Points Output" ( CDI box ground trigger.)
    Dwell Time ................. ― "2.0 msec" ( Do not set this to 1.5 msec!)
    EFI Software Help Information/Instructions:
    ‒ On the top Toolbar, click "Help" & "Contents". This opens all Help topics.
    ‒ When navigating the software, click "Help ?", drag it to any parameter and click again.
    ..This automatically opens the definitions for that specific parameter.
    ‒ Tuning information can be read by clicking the F1 key, when you're viewing any screen.
    http://documents.holley.com/techlibrary_199r10544.pdf (Holley EFI Help/Instructions Overview)
    http://documents.holley.com/techlibr...r10546rev1.pdf (Holley EFI Quick Start Guide)
    http://documents.holley.com/techlibr...10555rev17.pdf (Holley EFI Wiring Manual & Diagrams)
    http://forums.holley.com/showthread....ents-Read-This! (Initial Checks & Adjustments - Read Steps #1-#6!)
    Open the Holley EFI software "Help" Contents ("Help" drop down menu), and read "Step-By-Step Beginners Tuning".
    Ensure the EFI software is set to run as an "Administrator" (right click for Properties/Advanced). Set it and forget it.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, 100HP progressive dry direct-port NOS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, 160A 3G alternator, Optima Red battery, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #4

    Default

    Thanks Fastman, I appreciate that! I worked with OEM EFIs for many years, but this is my first 'DIY' system.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us