Results 1 to 4 of 4

Thread: Injector Issues

  1. #1

    Default Injector Issues

    So I'll start this off with the shortened version. Car broke last June, left E85 in it till Spring drained cleaned injectors and fired up ran perfect. One day a little hesitation off idle the ran for crap next. Pulled injectors, cleaned again with carb cleaner can, and light bump on 12V all looked good nice pattern, etc. Put back on, ran for crap. Put my old smaller injectors on and runs like new. They all check the same Ohm 2.2 they look good on a 12V bench test, bump with a can of carb cleaner, but obviously one or more doesn't work correctly how do you tell if one is bad? I cleaned and inspected all of the fuel system, swapped ECU changed plugs, verified spark and cam signal, etc., and for sure it was the injectors. Thanks, Russ

  2. #2
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    1,282

    Default

    I think you answered your own question. Have your injectors flowed or replace them.

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,857

    Default

    I was thinking the same thing.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #4

    Default

    I'm replacing them. I was just curious if there was another way to test them other than sending them out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us