Results 1 to 3 of 3

Thread: Outputs - Switched Input Triggers Issue

  1. #1

    Default Outputs - Switched Input Triggers Issue

    Trying to turn on a solenoid with a Switched Input Trigger under the outputs in the Configure screen. It's working off of a switch (micro switch), but I cannot get it to work using the Rev Limiter #1 Enabled. I would like it to work when both the switch and Rev Limiter #1 is Enabled. Have tried it with just the Rev Limiter, but it won't work, am I missing something?

  2. #2

    Default

    How about just getting it to work using the Rev Limiter as the trigger?

  3. #3

    Default

    Name the Output, Enable it, select Type Ground or 12V, Configure it with 1 Switched Input Trigger and select Rev Limiter #1 enabled. Then pin your output. Note: Never use an output to control a solenoid directly. You must use a relay with protection: https://forums.holley.com/showthread...97-Diode-Relay (Post #2)
    Last edited by BoostedCP; 05-09-2019 at 03:11 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us