Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Which Kit?

  1. #11

    Default

    So what I'm looking for is an initial setup. Primary & secondary throttle plate position. .020" on the primary and match the amount opened on the secondary?
    Engine is a Ford FE, 10:1, Comp 282S cam, Edelbrock heads & intake, headers, etc. About 11-12 inHg vacuum at 750 RPM. What I'm trying accomplish is getting the idle & cruise AFRs set.

  2. #12
    Join Date
    Jan 2010
    Location
    Brisbane, Australia
    Posts
    1,591

    Default

    It isn't that critical.
    Hold the throttle up to the light, and make the secondary just short of the primary.
    This is a vacuum secondary carb, two corner idle, and no replaceable bleeds.
    It pulls fairly good vacuum, I would be more concerned if the camshaft was larger. Gary
    Last edited by Gaz64; 11-13-2019 at 02:01 AM.
    Regards, Gary

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us