Results 1 to 5 of 5

Thread: Knock sensor use with methanol?

  1. #1

    Default Knock sensor use with methanol?

    Any thoughts on using the knock sensor on a naturally aspirated SBC with methanol as fuel. I'm leaning toward not using it, given the nature of the fuel and not really wanting to pull timing in a bracket car. This is a light weight tube chassis bracket race only car using (soon to be) a Dominator EFI V5. Thanks again to all!

  2. #2

    Default

    If the timing curve is set correctly, the knock sensors are not really needed. Think of them as a fail-safe device. Also, in a race car, the knock sensors may pick up other "noise" and interpret that as knock. Andrew

  3. #3
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,416

    Default

    I agree. If your ignition timing is tuned (especially for a repeatable application such as drag strip use), no need for knock sensors.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #4

    Default

    Bracket engines running solid roller cams create a lot of mechanical noise. I'd say you don't need the knock sensors. When I tune bracket cars that are "near the edge", I might use the knock sensors and just datalog the results, but not retard the timing. This tells you if you really need it., and the answer is usually no. efiexpert.com
    Last edited by fastmanefi; 04-30-2019 at 12:07 AM.

  5. #5

    Default

    Thanks gentlemen, as always I appreciate the knowledge & response. It's a roller, but no where near the edge! I'm still just working on wiring lengths and what's necessary or not. Shooting for a clean simple install. Very basic. Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us