Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Enable Switched Caution/Warning Outputs

  1. #1

    Default Enable Switched Caution/Warning Outputs

    As I browse more I noticed the option to Enable Switched Caution/Warning Outputs. Question is, could you use this to trigger two different colored lights, say for RPM. Kind of like shift lights I guess is what I'm saying?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,676

    Default

    Sure you can. I have a couple of the Enable PC/LCD Caution/Warning Outputs (from the Sensor Scaling/Warnings - System ICF) on my Digital Dash.

    EFI Software Help Information/Instructions:
    ‒ On the top Toolbar, click "Help" & "Contents". This opens all Help topics.
    ‒ When navigating the software, click "Help ?", drag it to any parameter and click again.
    ..This automatically opens the definitions for that specific parameter.
    ‒ Tuning information can be read by clicking the F1 key, when you're viewing any screen.
    http://documents.holley.com/techlibrary_199r10544.pdf (Holley EFI Help/Instructions Overview)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3

    Default

    Deadly. Thanks.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,676

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  5. #5

    Default

    Basically I can run two wires from the ECU, set as ground triggered, run those two wires one to each light, and hook other side of light to 12V switched power. I shouldn't need a relay in there anywhere? I don't think I do.

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,676

    Default

    The ECU Outputs are rated at a maximum of 2 amps, so ensure your lights don't draw more than this.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  7. #7

    Default

    I may do a ground triggered relay just to be on safe side.

  8. #8
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    1,381

    Default

    I used an LED like these: https://www.amazon.ca/Ltvystore-50pc...ateway&sr=8-32. They draw very little.

  9. #9
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    22,676

    Default

    Quote Originally Posted by 438wStang View Post
    I may do a ground triggered relay just to be on safe side.
    No need for a relay, a small indicator light bulb won't be anywhere near 2 amps. Just use an LED light, and you're sure to be OK.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  10. #10

    Default

    Nice. Thanks for the link to those lights and the advice.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us