Results 1 to 3 of 3

Thread: Stealth Ram & Commander 950 Tech Questions

  1. #1

    Default Stealth Ram & Commander 950 Tech Questions

    I have the Stealth Ram with the Commander 950. I have a couple questions, but I'm sure that a couple will turn into a few based on the answers I receive.
    1) How do I know/what's the easiest way, to tell if I have the Narrow or WBO2 setup? I have the main ECU and there's a smaller module that says "Commander 950" on it and the WBO2 sensor plugs into that module then to the header, not the main ECU. Is this module the same for both narrow and WBO2?
    2) Is there anyone in/near Iowa that is good with the programming of the C950? I'm in the Des Moines area, but can travel if needed. I'll admit, I know just enough to be dangerous, but I don't want to play with something I'm not sure of. Too much money invested to burn a new engine up. TIA, Jeff

  2. #2
    Join Date
    Dec 2009

    Default (Holley 534-197 C950 WBO2 Sensor Kit - Bosch WBO2 Sensor) (Holley 534-188 C950 WBO2 Sensor Kit - NTK WBO2 Sensor) (Innovate Motorsports LC-2) (Holley C950 WBO2 Integration)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

  3. #3


    I'll get a photo of what I have and that should clear things up. Give me an hour or two. It looks like the Bosch kit, if I remember right.
    Click image for larger version. 

Name:	Holley commander 02 module.jpg 
Views:	14 
Size:	61.1 KB 
ID:	8110
    Last edited by resto-mod; 04-22-2019 at 06:12 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us