Results 1 to 10 of 16

Thread: Tuning ideas for 4776 DP on a 327.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11


    Thanks as always for the quick reply! Just to be clear, this happens on the 1850-2 and the 4777 DP. And only when 1) Idle air screws are set to less than 1.5 turns. 2) When accelerating with some spirit, the gas pedal is let off and the clutch pedal is depressed.

    If shifted below 3000 RPM, driving more gently, this does not occur. Just when driving with more pedal. At 3000 RPM, my centrifugal advance is all in. When clutch pedal is depressed My vacuum advance will be all in, 8°-9° advance with my current limiter. That would give me 35°-36° + 8°-9°. Roughly 44° advance which gets me no trailer hitching or pinging.

    I can eliminate this pop by turning the screws to 1.75 turns or greater even though max vacuum at idle is 1 to 1.25 turns. I feel the primary jets are a touch lean at 66. In no way does this contribute to my issue? I’m planning on trying 68s regardless. Rob
    Last edited by H.O.rider; 06-15-2019 at 10:38 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us