Results 1 to 3 of 3

Thread: 60143 MSD box won’t stay running.

  1. #1
    Join Date
    May 2010
    Posts
    12

    Default 60143 MSD box won’t stay running.

    I have this box installed it did run for about three minutes. Next it would start & run for about 20 seconds then die, restart and run for 10 seconds the die then not start. Now it will fire only with starter running. It’s got the early truck coils, so I’ve got it set on the “truck” setting. Replaced both crank & cam sensors no effect. Where do I go from here?

  2. #2

    Default

    Where do you have the main positive & negative wires going to?
    shake-n-bake

  3. #3

    Default

    Also, if at all possible please connect this unit to a laptop to see if you're getting any errors and when cranking it see RPM, so we can better diagnose the issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us