Results 1 to 10 of 11

Thread: Edlebrock 7116 vaccum leaks? Atomic EFI

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2018
    Location
    Sonoma ca
    Posts
    17

    Default Edlebrock 7116 vaccum leaks? Atomic EFI

    I am having a most of the symptoms of a vacuum leak all but, the ability to find it. I have changed the throttle body base gasket. I even bought copper gasket sealer. (Never have had to use it before). I have new Fel-Pro problem solver intake gasket. (These are the thicker black and steal). My intake bolt are torqued to 11lb. I have sprayed break clean around all ports and throttle body base. Plus around the NPT fittings in the the Throttle body and its lines. Brake clean will not change idle. Yet I have a hesitation under hard throttle. Pump squirt is at 25% power valve enrichment is at 25. When at idle in reverse my iac jumps to 4-5. In drive it will do the same then after 10 seconds or so it will start to creep up. It will take 30 sec but, it will go up to 15 slowly. Any help would be great.
    Last edited by Xsefan; 12-11-2018 at 02:24 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us