Results 1 to 10 of 10

Thread: Holley EFI Gauges with Avenger EFI

  1. #1

    Default Holley EFI Gauges with Avenger EFI

    Will the Holley EFI Gauges work with the Avenger system?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,469

    Default

    Yes, the Avenger EFI is an HP EFI system (HP ECU).
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3

    Default

    Great. Thanks for getting back. Next question. If I was to install a AFR gauge, am I'm looking for be the left or the right as there is only one in the system.

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,469

    Default

    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  5. #5

    Default

    Thanks Again!

  6. #6
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,469

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  7. #7

    Default

    So I have the gauges working for the most part. And they are Bitchin'! I'm running them in a 1989 Tucker Sno-Cat. They're now keeping close eyes on an Industrial Chrysler 360.

    The one snag I have is that the boost/vacuum gauge is not working. Not sure if I got a bad one or if boost/vacuum is perhaps not supported with the HP/Avenger. It sits at zero with engine running. I disconnected MAP sensor, assuming this is where it gets it's info, and engine died. Thought maybe engine was running in limp mode and system was getting no signal. Any direction would be appreciated once again!

  8. #8
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,469

    Default

    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  9. #9

    Default

    Thanks again!

  10. #10
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    21,469

    Default

    You're welcome.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: Dominator MPFI & DIS, A/C, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/X-pipe/shorty headers, 100HP progressive dry direct-port NOS, 160A 3G alternator, Optima Red battery, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us