Results 1 to 2 of 2

Thread: Aeromotive 340 Stealth tank 340 LPH pump replacement.

  1. #1

    Default Aeromotive 340 Stealth tank 340 LPH pump replacement.

    Hello, I have an Aeromotive 340LPH Stealth tank setup in my Chevelle. currently running MPFI with Dominator EFI. I attached a #16-111 HydraMat to the bottom of the Aeromotive pump to eliminate a brutal fuel starvation problem under hard launch with less than 3/4 tank of fuel. This eliminated the issue, but now the pump is failing after 1 year (I expected this since their techs said the HydraMat would drastically shorten pump life). The question is, does a #16-111 HydraMat fit on a Sniper #19-341 or 19-342 pump and is it allowed on the sniper pump? The Sniper specs do not list the Sniper pump inlet diameter size (HydraMat is 11 mm).

    The other option might be the Holley #12-929 450LPH pump which lists the HydraMat as an service part option but, the specs say this pump is used on TBI systems (40 psi) and my MPFI injectors run at 55 psi. I'm slightly confused by the spec sheet for this pump which says the maximum psi is 87, which is much higher than the 40 psi. If the #12-929 pump can hold 55 psi I'd most likely choose this one due to its higher LPH rating. Any help/advice on what is the best path forward would be great. Thanks! - Glenn

  2. #2
    Join Date
    Dec 2009


    You're confusing psi ratings with what the pump is actually capable of.
    The psi ratings are for performance (volume) information only; they're not a pressure setting.
    EFI fuel pumps have a wide range of psi capability; you set the exact pressure you need/want.
    Electric fuel pumps only produce volume, the fuel pressure regulator sets the desired pressure.
    Also, any EFI fuel pump will decrease volume output (GPH flow) as fuel pressure is increased. (Fuel System Selection Chart)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us