Results 1 to 4 of 4

Thread: IQ3 Street dash EFI data reading question.

  1. #1

    Default IQ3 Street dash EFI data reading question.

    I have an IQ3 street dash that I just added the EFI CAN cable to my MEFI 5. After I plugged the cable into the data port on my computer and to the back of the dash, I was able to detect new sensors and now the EFI data shows up on my data link software page, and also I can select the EFI sensor on the dash configuration page. But after sending the new configuration to the dash, the dash just displays zeros. None of the EFI information will display? I hope you can tell me what I'm doing wrong. Thanks.

  2. #2

    Default

    Did you end up sorting this issue? Mines doing the same thing, only I'm using a Motec.

  3. #3

    Default

    Having the same issue. Any suggestions or solutions?

  4. #4

    Default

    I'm having same issues with MEFI4. Did anyone figure it out?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us