Results 1 to 3 of 3

Thread: IQ3S Fuel Gauge Custom Parameters

  1. #1

    Default IQ3S Fuel Gauge Custom Parameters

    I am trying to input a specific OHM range for the fuel gauge on my IQ3S and cant figure out how to do so through the Datalink software
    10ohms full and 11ohms at empty

  2. #2

    Default Re: IQ3S Fuel Gauge Custom Parameters

    I found it easier to input a voltage range against your unit of choice (Liters or gallons) though it took a little messing around. My setup was using a USM though, not sure how the street dash works it.

    I did it via the custom calibration page for the input. I checked the voltage empty, full and in a number of points between and used that to build a custom table of volts versus liters.

  3. #3

    Default Re: IQ3S Fuel Gauge Custom Parameters

    Scratch that, download the street dash manual if you have not already. There is a custom calibration procedure for the fuel sender on page 30.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us