Due to the limitation of the Haltech PS1000 not transmitting generic sensor data for the IQ3 to see it has been suggested that I use an available input for another brake pressure sensor. Note the Elite series does broadcast generic sensor data and is seen by the IQ3.

If, for example I used an EGT channel input that is available for the brake pressure data, that is set AV1 up in the PS1000 as EGT5, but in reality it is getting 0-5v from a pressure sensor, how would I configure the IQ3 to know that it was receiving pressure data and not temps?

The only other solution is to purchase a USM and hook this up and bypass the PS1000.

Help appreciated as I have 4 suspension sensors that I want to get working as well.