Results 1 to 2 of 2

Thread: Connecting Sportsman to MSD Grid

  1. #1

    Default Connecting Sportsman to MSD Grid

    I am going to connect my Grid to my Sportsman. There is one channel I want to log. I have a question on the v-net wiring though. Can it be wired like this:



    Or does it require a Tee and a Cap before the Grid like this:



    If it has to be wired like the second option, I am assuming the internal resistor in the Sportsman has to be disabled. Is this correct? If so, how is this done?

    Thanks!

  2. #2

    Default Re: Connecting Sportsman to MSD Grid

    sir,

    you do not need another t cap. Just the one that comes with the sportsman. So your first diagram looks to be correct.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us