Results 1 to 2 of 2

Thread: Smartwire channel True and False Delay

  1. #1
    Join Date
    Sep 2011
    Location
    Wellington, New Zealand
    Posts
    108

    Default Smartwire channel True and False Delay

    Today I was setting up a channel condition where I wanted it to delay the on and off and set the values accordingly, sent config and then tested.

    Now as you can see I set the RPM above 2000rpm to enable to channel but as soon as 2000rpm was past it turned on the channel, but with the "true delay" set to 5 I would have expected it to wait 5 seconds before turning on the channel........??? Have I missed something ???

    Also has the same result on the "False delay" side of things too, as soon as the RPM dropped below 2000rpm it turned off the channel..........


  2. #2
    Join Date
    Sep 2011
    Location
    Wellington, New Zealand
    Posts
    108

    Default Re: Smartwire channel True and False Delay

    Seems one of my other threads regarding the new features on the new firmware revisions answers this one as it's fixed in the Rev 21 firmware ! I'm only on Rev 18 as I was waiting to know what was fixed before updating.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us