Results 1 to 4 of 4

Thread: Output question

  1. #1

    Default Output question

    Hello

    Does Smartwire have an output that is ground?
    A ground is required to activate the over-ride on a Aeromotive fuel pump speed controller; would like Smartwire to send a grounded output when TPS > 25% or if fuel pressure falls to <65psi.

    Please Advise
    Rick

  2. #2

    Default Re: Output question

    I know it sort of defeats the purpose of the smartwire in one way, but if it can not pull to ground (I don't have one so no idea) you could use a smartwire output to switch on a relay with a ground connected to your speed controller via a normally open contact. 12V from the smartwire, ground from the relay.

  3. #3

    Default Re: Output question

    Connect a channel of the smartwire directly to the pump + and configure channel as required this will have the added benefit of being a failsafe for the pump controller or remove pump controller and use 2 channels of smartwire to do the job

  4. #4

    Default Re: Output question

    Are you looking to be able to control the speed of the pump rather tan switch it on?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us