Results 1 to 3 of 3

Thread: Smartwire logic question

  1. #1

    Default Smartwire logic question

    Hello

    I have my shift light and oil warning light wired thru my smartwire. the shift lights uses a simple one line on condition (rpm greater than 7500), and the oil light uses 2 lines (rpm greater than 500 and oil pressure lower than 50 psi). This all works like it is suppose to.

    But i would like to have my oil and shift light pulse on a few seconds when i power up the car, so i can see that they work.

    How do i accomblish that while still retaining the normal on conditions ?

  2. #2

    Default Re: Smartwire logic question

    Is this forum active?

  3. #3

    Default Re: Smartwire logic question

    If you have a output channel that you are not using, you can program it as a secondary output for the light. You could name it "Light Test". Program the channel to single pulse for 3 seconds and trigger it off Smartwire #1(x1ee). This is when Smartwire is active. Then tie the second output channel to the first within a couple inches of the connector at the SmartWire.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us