Results 1 to 2 of 2

Thread: V300SD to PC Interface Cable

  1. #1

    Default V300SD to PC Interface Cable


    Can someone advise what cable and part no. is needed to interface the V300SD data logger to a PC. I download the run data using the SD card, however, I’m adding a new VNet Sensor. My PC has a serial port. The racecar I bought didn’t come with the cable.

    Thanks - Mike

  2. #2

    Default Re: V300SD to PC Interface Cable

    Hello Mike,

    The part number you will need is: 280-CA-ST140SR. They are $20 You may also need a USB to serial adaptor also if you don't already have one. That part number is 890-CA-USB2SER and they are $45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us