Results 1 to 10 of 10

Thread: Psi to bar and mph to kph

  1. #1
    Join Date
    Mar 2013
    Location
    Sweden
    Posts
    18

    Default Psi to bar and mph to kph

    I have this moduls

    Pressure, Fuel, Pump, 0-150 psi
    Pressure, Oil, 0-150 psi
    and a Iq3 logger.

    How do i get bar insted of Psi on the dash ?
    And how can i shange from mph to Km/h ?

    I allsow have a Temperature, Oil, 0-300°F
    but this one i can shange in data link from F to Celsius, but i can`t find the option with the pressure moduls.

  2. #2

    Default Re: Psi to bar and mph to kph

    will it be A = 0.5 will become 0
    B = 4.5 will become 10.34 (150 psi divide by 14.5)
    set the maximum result just under

    for gps mph mine is set in the g2x logger proerties for gps speed

  3. #3
    Join Date
    Mar 2013
    Location
    Sweden
    Posts
    18

    Default Re: Psi to bar and mph to kph

    Thx.

    But i still can`t change frpm Mph to Km/h how do i do ???

  4. #4

    Default Re: Psi to bar and mph to kph

    Hy Robin
    I think you have to load the metric config. file!

  5. #5
    Join Date
    Mar 2013
    Location
    Sweden
    Posts
    18

    Default Re: Psi to bar and mph to kph

    Quote Originally Posted by philipp1910
    Hy Robin
    I think you have to load the metric config. file!

    I have.
    in Datalink II all walue are in KMH but not in the dash.

    How do i load matrik in to the dash ?

  6. #6

    Default Re: Psi to bar and mph to kph

    Open datalinkII , then file chose open car configurator then select IQ3-config_metric and then click on the left side on write
    then the metric setup will be writen to the dash.

    i hope that will help you

  7. #7
    Join Date
    Mar 2013
    Location
    Sweden
    Posts
    18

    Default Re: Psi to bar and mph to kph

    It didn't work. All sensors value changed to metric but not the speed unit.

    I have tree more problem.

    My new v-net sensors shows 2.8 - 3.2 bars fuel pres as starting pressures.
    My Old Defi shows 3.5 all the time.
    I tested with the one I got fore fuel pres (0-150psi) and the sensor fore oil pres.

    My gear indikator is totally wrong.
    Wen I'm in first gear it shows 4th. Wen I shift to 2nd it shows 6th.

    And at last ....
    Wen I try to open a logged file ore press open file its shows "cannot open Racepak USB device!
    Is it connected to your USB port?!"
    Wy ????

  8. #8

    Default Re: Psi to bar and mph to kph

    have you got the correct values for the new sensors in the A + B boxes? should be a sheet with the sensors telling you the values

    the gear indicator sounds like you have got the wrong ratios/settings for your gearbox

  9. #9
    Join Date
    Mar 2013
    Location
    Sweden
    Posts
    18

    Default Re: Psi to bar and mph to kph

    its a pre programd sensor so the value is right. i hope ??

    This is the right ratio, but is this the right value fore the Racepak ?

    Gearbox v160 (Toyota supra Mkiv 6speed)
    1: 3.827
    2: 2.360
    3: 1.685
    4: 1.312
    5:: 1
    6: 0.793

    Diff / final : 3.266

    Tire roll 25,441 inc or 64,6 if I set a cross in the Kmh box.

  10. #10

    Default Re: Psi to bar and mph to kph

    I found the gear position/ratios calculation to be much easier using the programming buttons on the move than calculating them out and directly entering them.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us