Results 1 to 3 of 3

Thread: V300 Clutch RPM channel

  1. #1

    Default V300 Clutch RPM channel

    Can you convert the clutch RPM channel in the software so it will either read transbrake or a clutch pedal? I want to be able to see either the transbrake or clutch pedal which is a 16 volt setup.

  2. #2

    Default Re: V300 Clutch RPM channel


    Yes you can change it to an event marker and when the wire sees a signal it will put a line on the graph. please see instructions for your V300SD attached.
    Attached Files Attached Files

  3. #3

    Default Re: V300 Clutch RPM channel

    And last question, my setup uses a Pro-mag 44 ignition and I dont know if its whats causing the issue on the RPM channel. I recently added an MSD 8920 tach adapter to amplify the signal so I could use my current MSD 8918 tach pickup to power both the shift light and the 300v.

    I am getting some random spikes in the RPM channel, not too terrible but its a spike every 2 seconds or so. If I change the smoothing from 1 to 4 it basically eliminates the spikes. Is there any other programming ways to eliminate the problem? I can post a screen shot with the smoothing at 1 and at 4 if that helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us