Results 1 to 3 of 3

Thread: EGT Probes

  1. #1

    Default EGT Probes

    Hi, i recently had an incident which has lead to the egt probes being pressed and now i was wondering that this could have done any damage to the probes them self. I use 4 of them and 3 were bent. Some more than another. Could this harm the probes? Do i need to get new probes or can i leave them as they are or should i straighten them out to the 90 degrees they were at?

  2. #2

    Default Re: EGT Probes

    You may need to if you are getting erratic readings. If they have been flattened it may have cracked the porcelain in the probe causing them to not work or read wrong. You would need to test them to be sure.

  3. #3

    Default Re: EGT Probes

    Thank you for the reply sir,

    being like you said what would be the method or methods for testing the probes??


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us