G2X Pro V-net warning light hookup

[BlownHydroGP17]

We recently installed a G2X Pro in our Blown Alcohol hydroplane and it is working great!....We got a warning light and a the v-net warning light 4 channel sensor. Will the 4 channel sensor do all EGT 8 cylinders?...Does this just wire into the warning light and then plug into the v-net?...then reconfigure the configuration file with the high & low?...We would like to hook up the warning light so if any one od the cylinders gets to a certain temp the warning light will come on. Can you give me some help on how to install?...Thanks

www.g-17.com

[Cam@Racepak]

Sir,

Yes you can do all 8 with what you have. Each warning output has 2 stipulations that can be set. Yes you will need to read the v net module into your config then this will populate the channels for your warning lights. You will right click on the channels and set your parameters in the setup options.

[BlownHydroGP17]

How does the wiring work?....do all the wires hook up to the corresponding side of the warning light? ...Thanks