Results 1 to 4 of 4

Thread: Lenco air shift

  1. #1

    Default Lenco air shift

    Is it possible to use the smart wire to shift lenco air pods baced on rpm started after transbrake released,

  2. #2

    Default Re: Lenco air shift


    Yes you should be able to providing the logic is correct. You would need to also have a Racepak data logger and a transbrake input.

  3. #3

    Default Re: Lenco air shift

    Hi cam
    Right I want to try this so what I want is
    Shift 1 at 7600 rpm after transbrake released but not before 1 second has passed
    Shift 2 at 7700 after shift 1 output but not before 2 seconds has passed
    This should stop it shifting due to wheelspin on launch and shift
    Can it be done and how do I set the logic up


  4. #4

    Default Re: Lenco air shift

    I am also considering a smartwire for my race car.

    But I was wondering if you can configure/ program the smartwire to shift on a specific RMP settings base on Transbrake input? Also wondering why do you need a datalogger to acomplish this?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us