Results 1 to 2 of 2

Thread: Blaster 2 in 1979 Ford F350 460 CID

  1. #1
    Join Date
    Oct 2018

    Default Blaster 2 in 1979 Ford F350 460 CID

    I was sold a Blaster 2 Model 8202 in lieu of standard Ford OEM coil. Do i need to use the coil ballast resistor? I have been told there is a resistor or resistor wire in the original ignition system. Therefore the ballast resistor is not needed. Would there be a problem placing the coil ballast resistor in the system with a resistor in the distributor? Thank you!

  2. #2


    Mr Robobo
    On your vehicle you shouldn't need an external ballast resistor especially if there is one integrated into the factory harness.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us