Results 1 to 2 of 2

Thread: 6014 “Latched” setting

  1. #1
    Join Date
    Apr 2017

    Default 6014 “Latched” setting

    Hi. I’m not running a trans brake or 2 step right now. Should the setting be “enabled” or “disabled” I had it set on “disabled” But it seems to be breaking up at 4000 rpm and I’m thinking this may be some of the issue. I went back and read through the instructions but that part seems confusing to me for some reason. Thanks

  2. #2


    We normally recommend having it on enabled. The latched feature is there mainly for standard vehicles, what it does is if the 2 step wire is connected to the clutch it will not reactivate unless it sees at least a third of the RPM drop. So if it is set at 3000 rpm it needs to drop 1000 rpm to reactivate. I hope this helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us