Results 1 to 4 of 4

Thread: 2 step Pn8732 and 6al 6425

  1. #1

    Default 2 step Pn8732 and 6al 6425

    Issue not coming up on 2 step. This is the second box. Find it hard to believe that both are bad. Rev limtter works on 6al box. 2 step has 12v and blue wire to trans break.. when pressed light comes on. Any help would be great.

  2. #2

    Default

    hello Floyd90cmo,

    where do you have the ground going to from the box? another thing to check is on that blue wire going to your trans break make sure that it is getting 12v when activating it because if it drops lower then 12v it might not activate. check with volt meter. another way to test it is to set the 2 step at a low rpm then take that blue wire direct to the battery positive and it if it activates

  3. #3

    Default

    Thanks yes I had tried all the above. Sent it in to msd this Monday. Just waiting on the other to show up

  4. #4

    Default

    okay sounds good sir thank you
    shake-n-bake

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us