0 psi of fuel pressure on the dash - Car not starting

[fstuff138]

Hi,

I have a TBI efi newly instaled on a mopar 318. It´s running a MSD-6AL iginition with a pro-billet distributor and a blaster coil. Also using a return fuel system as described on the install instructions.

Thing is that i get 0 psi when the pump gets primed and a can hear the line getting pressurized. Also, I checked with a fuel pressure gauge and I have 50 psi on the line. My guess is that the reason why my engine is not starting... Below 15-psi there is no injector pulse.

Can it be a bad fuel pressure sensor or anything else? ]

thanks!

[Bdud]

Loose connector on the fuel pressure sensor, possibly.
I presume you have plumbed it up correctly, post a picture.