Results 1 to 2 of 2

Thread: Tach adaptor 8910

  1. #1
    Join Date
    Dec 2016
    Posts
    1

    Default Tach adaptor 8910

    I am planning to fit a 8910 tach adaptor and noticed that there are 2 options 8910 or 8910 ESI.

    My set up is,
    MSD 6530 box
    Mallory twin point dist with pertronix 1 installed.
    Current triggered factory tach.
    I am planning to use white wire to trigger tach.

    Car is a 69 AMC Javelin.
    Factory wiring is set up with a resistor wire to coil.
    Using MSD 6350 eliminates the resistor wire.

    Which tach adaptor is suitable for my setup.

    Thanks.

  2. #2
    MSDTECH80 Guest

    Default

    You will need the pn8910.
    The 8910eis is for certain fuel injection vehicle.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us