Results 1 to 4 of 4

Thread: Pro Mag 8106 box

  1. #1

    Default Pro Mag 8106 box

    Will the grid work with this setup and should I run this thru a 4 can bus? This is on a Blown and injected BBC on alky. Any help would be nice.

    Thank you

  2. #2
    MSDTECH80 Guest


    Yes, the power grid will work pro mag 8106.

    Unless you want to put a boost retard module pn7762 then you will need a CAN Bus 7740.

  3. #3


    Do I plug the 8106 in the canbus and then the canbus in the mag?

  4. #4


    Not the CAN Bus connector. Follow the instructions for the Promag44 diagram, it will connect to 2 pin connector of the generator.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us