Results 1 to 2 of 2

Thread: Testing 7763

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2016
    Posts
    1

    Default Testing 7763

    Just received my 7763, installed and plumbed per diagram for dual wastegates. On setup, installation instructions mention setting Boost Control OFF RPM to 0 to test for leaks and determining if the system is functioning. I have my wastegate target set to 5psi, changed OFF RPM from default (2000) to 0, CO2 regulated to 20 psi- nothing happened. The only way I can get the solenoid to open is by pressing the red button on top of the solenoid which then supplies 5 psi to both gates, as observed on Wastegate Pressure in the monitor. If I bleed the pressure off at the gates it will not go back to target pressure unless I press the red cap again on the solenoid.
    Shouldnt the solenoid keep the target psi on the gates any time the module is powered / OFF RPM is exceeded? Thanks

  2. #2
    Join Date
    Jan 2016
    Posts
    6

    Default

    As long as the ignition switch is on you should get target wastegate pressure at the gates and also see it on your msdview as wastegate pressure.

    target and wastegate pressure should be within a couple tenths of each other.

    I did have to reinstall msdview one time when the controller would not control pressure.must of had some type of glitch.after I reinstalled,it has worked fine eversince.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us