Results 1 to 6 of 6

Thread: not learning

  1. #1

    Default not learning

    when i have my car running the display said (not learning) what would cause that ? i'm so close to having a good running car

  2. #2

    Default not learning

    also motor is ls3 408 c.i. 3 bolt cam 24x wheel , so basically big ls1 .should i enter it as ls3 or ls1 has, 53 pound inj. 1x timing gearset installed straight up

  3. #3

    Default not learning

    Is it being displayed all the time? Even after the coolant temps are warmed up? I saw on the "Atomic EFI A to Z" video the engineer stated it wouldn't learn until the 158 degree coolant temperature threshold was met. If you aren't running a thermostat or aren't giving it enough time, that could be the issue.

    15:36 he speaks of this.

    https://www.youtube.com/watch?v=7t3pddPSErY

  4. #4

    Default not learning

    thanks, i'll take a look

  5. #5

    Default not learning

    Learning is also OFF when at WOT and if any Errors are present.

  6. #6

    Default not learning

    so correct me on this, i can only enter this engine as " custom " not as an ls1 then add these parameters 408 c.i. , 53 pound inj., cam, etc. i'm just a little confused? motor is ls3 block with 408 c.i. 53 inj. large cam 24x reluct. wheel 1x timing set, so it's like ls1. i'm just double checking with you. i only need to hook up fan & wee ready to break in. any set up tips

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us