Results 1 to 2 of 2

Thread: Cannot communicate with Atomic EFI

  1. #1

    Default Cannot communicate with Atomic EFI

    Was hoping to be at this stage earlier today when the support on the phone was available but I was too late and ran into this error:

    "ERROR !


    I have verified the CAN cables are fully inserted into the sockets and that the hand held display is plugged into the correct port. Today is the first time I have attempted to power it up. Anybody have some ideas?

    Attached files

  2. #2

    Default Cannot communicate with Atomic EFI

    Updated the three firmware files and it powers up and communicates now. I thought that it should of been able to do that out of the box, but it was simple enough.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us