Results 1 to 10 of 66

Thread: RPM drop rapidly when coming to a stop and engine wants to stall or does stall, after 116 Update

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default RPM drop rapidly when coming to a stop and engine wants to stall or does stall, after 116 Update

    I have been driving my car more often since i have off from work for a few weeks and this issue is really starting to worry me because the engine will stall or sound like it wants to stall and il loose steering and brakes

    the engine runs perfect this symptom only happens when i am driving on the highway for a while and get off the exit i slow down or downshift and the engine just drops really fast and almost wants to die if i dont gas it.

    Why is the engine IDLE dropping so quickly? What adjustments can i make to compensate for this? with the 116 update the engine idles smoother and much lower in the RPM that it ever did with the earlier 114 update. I raised my RPM 150 more but this did not help. I am not using timing control yet. I have not touched power enrichment setting from the factory setting, What can i do?

  2. #2
    Join Date
    Oct 2018
    Location
    Sonoma ca
    Posts
    17

    Default

    I just finished my throttle blade adjustment, as in two hours ago. I went on a drive with lots of stop signs. It did not die once! It was harder than I thought to do this adjustment. Just time consuming. This improved quality a bit.

  3. #3
    Join Date
    Aug 2014
    Posts
    15

    Default

    I have had this problem from the very day I first installed this,(4 years ago?) as of yet it has not been fixed. MSD tech is no help at all. Basically get the feeling they think I am not capable of following their directions. Or, they know what the problem is but the hardware has a design flaw that is not fixable. They will not admit to this due to that would lead to a law suit. All we can do is let everyone know NOT to purchase this crap and hopefully that will take it off the market. MSD products are not what they used to be as far as quality goes.

  4. #4
    Join Date
    Nov 2014
    Location
    Ont. Canada
    Posts
    1,388

    Default

    I have never used an Atomic EFI, so I don't know if it can datalog. If so, datalog the event. Then you need to figure out what it is not getting, fuel, air or spark. It needs all three or it will stall. Most times it's fuel. Look at where it's going in the fuel table as it decelerates and give it more fuel in this area.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us