1st efi

[dmstainless]

Hi this is my first go at this and I have a question about the fuel pump. Where I live it gets above 80deg but I can mount the pump less than 2' from tank and I do run premium gas all the time. So can I get away with an exterior mounted pump? Or can anyone offer some info to me on mounting my pump in tank? If I go In tank is it just a matter of a new sending unit? Or do I go the route of a whole new tank set up for this? My vehicle is a 1980 z28 running a nicely built 383 aluminum headed roller motor. I'm just not sure how critical it is, to run an in tank setup or not. I want to do what's best for dependability, or I wouldn't have invested in this set up in the first place right?

Thx

 

Allowed Extensions:  bmp conf doc gif jpe jpg jpeg png

[msdtech1955]

1st efi

http://www.atomicefi.com/forum.aspx?g=posts&t=16614 

this should give you some ideas.

[Xsefan]

You can put the pump anywhere you want.
They recommend in the tank due coolant sloshing over the pump. Anything that gets hot will ware out faster.