Im new to the 7761 and want to use it with nitrous can you use the rev limit with out blowing the scoop off? :w00t: or do you only use the timing retard function?
David
Junior Member
New to 7761
Im new to the 7761 and want to use it with nitrous can you use the rev limit with out blowing the scoop off? :w00t: or do you only use the timing retard function?
David
Member
I wouldn't suggest using the Rev Limit feature on a nitrous car, too violent. Just use the two retard functions only. Move the rev limit curve WAY out of the way so there is no way to run into it.
no sir,....use the timing ....Originally Posted by seaschorr
look at the pdf on this link ( basic 101)
http://www.msdperformance.com/pdf/power_grid_13.pdf
Member
I would highly recommend using a window switch such as the Brn/Wht wire so your nitrous shuts off before it gets to your RevLimiter setting, or there's a very good chance it will lift your scoop along with other things. If you have a sheetmetal intake I'd also put some plastic screws to hold the top plate on along with a tether in each corner of the top so if it does lift. It will save your intake/carbs and prevent a fire from fuel lines tearing off.
Posting Permissions
Reply With Quote