Results 1 to 4 of 4

Thread: 6013 issues need setup help

  1. #1

    Default 6013 issues need setup help

    I called the tech number and discussed my situation and am now very confused. I have the 6013 with the 88864 harness and 82558 coils. This is a carb setup stand alone ignition With the Waste spark off as the instructions say to do with the harness I have I get coil fault codes. I have 3 choices in the drop down Waste Spark on, Waste spark off, and waste spark harness. Also do I need to cut the brown wire loop? The thing that I don't understand is the instruction manual says with the waste spark on the coils will fire every 720 degrees I would think I would need them to fire every 360 as it states will happen with the waste spark off. Thanks for any help.

  2. #2
    msdtech1955 Guest

    Default

    I believed you called in around 4pm yesterday .

  3. #3
    Join Date
    Jan 2018
    Posts
    1

    Default

    Quote Originally Posted by drgracer1966 View Post
    I called the tech number and discussed my situation and am now very confused. I have the 6013 with the 88864 harness and 82558 coils. This is a carb setup stand alone ignition With the Waste spark off as the instructions say to do with the harness I have I get coil fault codes. I have 3 choices in the drop down Waste Spark on, Waste spark off, and waste spark harness. Also do I need to cut the brown wire loop? The thing that I don't understand is the instruction manual says with the waste spark on the coils will fire every 720 degrees I would think I would need them to fire every 360 as it states will happen with the waste spark off. Thanks for any help.
    Hi drgracer1966,
    I realize this is an old post but I'm having the same coil fault codes on my system. Did you ever find a solution to your issue?

    Best regards,
    Terry

  4. #4

    Default

    Did you figure out what the problem was I'm having the same issue

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us