Results 1 to 4 of 4

Thread: MSD 8862 Shielded Magnetic Pickup Cable

  1. #1

    Default MSD 8862 Shielded Magnetic Pickup Cable

    Will you shorten this 8862 to 4 feet? The 6 feet is way too long for my Pro Mag 12.

  2. #2
    msdtech1955 Guest

    Default

    Yes, no problem, you could use the MSD 8824 Kit for the pins & connectors.

  3. #3

    Default

    Good Morning! I have an MSD 8862 harness that I want to shorten, also have the 8824 connectors. Question might sound silly, but which end of the shielded 8862 do we shorten? I'm assuming the end without the ground connector. Any precautions to consider when snipping the end to shorten relating to the actual shielded wire?

  4. #4
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    25,508

    Default

    Yes, shorten the end without the shield ground.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS T/W 11R 205 heads, 232°-244° duration/.623" lift/114° LSA camshaft, 12:1 C/R, TFS R-Series FTI ported intake, BBK 80mm T/B, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 200A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, -6AN fuel system plumbing, Walbro 255 LPH pump, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/3000 RPM converter, B&M Hammer shifter, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us