Results 1 to 6 of 6

Thread: help with wiring 7330 and 2 stages

  1. #1
    bluedeuce Guest

    Default help with wiring 7330 and 2 stages

    !Please HELP with optional wiring , I have a 7330,biondo mega 85, autometer tach w/ memory,autometer pro shift light,electric shift in a glide, wot,2 arming switches, now the run down, I want on release of t/b stage 1 come on with delay or not,then stage 2 come on with set time after launch,also on linelock I will be using burnout rpm from 7330,,,, I have 7330 instructions but cant figure out this w/ timer etc. Wiring diagram will be gratefully appreciated, THANKS

  2. #2
    bluedeuce Guest

    Default also

    Want to use stage 2 by itself at times on launch if possible, thanks

  3. #3
    msdtech1955 Guest


    hope this helps

    the switch on the upper right is to either run the first and second stage together or just run the second stage off the timer after the release of the transbrake.

    7330 2 stages switch control on and off.JPG

  4. #4
    bluedeuce Guest


    Awesome Thanks, I hear the mega 85 only has 1 timer, is the 2nd stage going to work like this? if not can you rework this so arm switch turns on 1st stage (still on wot ) and 2nd switch turns on 2nd stage and will be on a button, also does anything connect to t-brake , PB 1, and throttle stop on mega 85? Thank and sorry for the confusion.

  5. #5
    msdtech1955 Guest


    timer turns on second stage

  6. #6
    bluedeuce Guest


    Ok Thanks, I finally had time to finish but just wired 2nd on button, later I'll go to timer.:thumbup1:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us