Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: 7730 work with a 7520

  1. #1

    Default 7730 work with a 7520

    Will the 7730 work with a 7520 with all the retards and limiters and the burn out control?

  2. #2
    msdtech1955 Guest

    Default

    all the timing fuctions will work ,but not the rev limiters.
    there is no external access on the rev limiter on the 7520

  3. #3

    Default

    Quote Originally Posted by msdtech1955 View Post
    all the timing fuctions will work ,but not the rev limiters.
    there is no external access on the rev limiter on the 7520
    Thanks!!!!:thumbup1:

  4. #4

    Default

    I know this is an old thread,,but question i have is ,,, will the rev limits still work with the blue wire from the 7520 when used for the transbrake???
    And everything else work with the grid as far as retard???

    Is there a wiring diagram to see as well.

    Thanks

  5. #5
    msdtech1955 Guest

    Default

    yes, the rev limiters on the 7520 will still work ..( launch and max)
    just none from the grid itself ( 7520 does not have a plug in style rev chip)


    as far as the drawing....

    white from 7520 to white ( 4 pin connector) on grid.

    blue on the 7520 to trans-brake ( tied into the dark blue on the grid)


    KEEP IN MIND .......you can only change the rev limits on the 7520
    and not in the grid ....

  6. #6

    Default

    Thanks for the reply

  7. #7
    Join Date
    Feb 2016
    Posts
    8

    Default SD card error codes when using with 7520 box.

    I need some advice on a problem that's occurring with my current set up. I have called in several times about this issue and so far no results. I am using a 7520 box with my grid and wiring it was done according to your tech line instruction.
    Problems occur when turning on ignition and orange light will turn green sometimes, but most of the time goes to red with error codes related to SD card. Seems it can't initialize the card. I have formatted, replaced SD cards, tried different versions of firmware, to no avail. I even changed the Grid with a known working one and still has the same issues.
    It seems to me this could be happening from a voltage issue on initial power up. I have 2 red wires that are wired in, one to fire the 7520 and the other small one getting power from ignition switch. I checked voltage and its well over 12 volts.

  8. #8
    msdtech1955 Guest

    Default

    what also appears in your alert box?power grid alerts 1.jpg

  9. #9
    msdtech1955 Guest

    Default

    and look here :

    power grid alerts 2.jpg

  10. #10
    Join Date
    Feb 2016
    Posts
    8

    Default

    13 Low SDcard Storage This alert activiates when an SDCard is present and there is less than 100 MB of storage available on the card. Remove some data from the SDCard to remove this alert. 14 SDcard Initialization This alert activates when the 7730 cannot initialize the SDCard. Make sure you are using the MSD factory supplied SDCard. 15 SDcard Write Error This alert activates when the 7730 is unable to write to the SDCard. Make sure you are using the MSD factory supplied SDCard. 16 SDcard Read Error This alert activates when the 7730 is unable to read the SDCard.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us