Results 1 to 5 of 5

Thread: 7531 with a edelbrock contoller

  1. #1

    Default 7531 with a edelbrock contoller

    Looking for a diagram to wire a 7531 box to a edelbrock controller. Using a single stage kit, trans brake, and would like to use the brown/wht wire.

  2. #2
    msdtech1955 Guest

    Default

    Quote Originally Posted by d66novass View Post
    Looking for a diagram to wire a 7531 box to a edelbrock controller. Using a single stage kit, trans brake, and would like to use the brown/wht wire.
    what controller ?

  3. #3

    Default

    Edelbrock 71900 nitrous controller

  4. #4

    Default

    http://www.msdignition.com/forum/att...5&d=1331573622

    Here is the diagram. Where should the brown/wht wire go?

  5. #5
    msdtech1955 Guest

    Default

    12 volt timer output.

    +12 Volt Timer Output: A digital timer is provided that can be used to activate an ignition retardcontroller or a 2nd stage of nitrous. The output from activation terminal is on (+12 volt applied). If the activation
    signal is removed, the +12V timer will halt until the signal is re-applied. The +12v timer can be programmed from
    0.000 to 9.999 seconds. The Options Menu allows the user to configure the timer output behavior while the controller
    is in the activated state. Optionally, the output can be configured to remain ON regardless of the activation input.
    NOTE - Setting the timer to 0.000 will disable the timer output.
    here is where the brown wire can be used ..
    forumedel.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us