7531 with a edelbrock contoller

[d66novass]

Looking for a diagram to wire a 7531 box to a edelbrock controller. Using a single stage kit, trans brake, and would like to use the brown/wht wire.

[msdtech1955]

Looking for a diagram to wire a 7531 box to a edelbrock controller. Using a single stage kit, trans brake, and would like to use the brown/wht wire.

what controller ?

[d66novass]

Edelbrock 71900 nitrous controller

[d66novass]

http://www.msdignition.com/forum/att...5&d=1331573622

Here is the diagram. Where should the brown/wht wire go?

[msdtech1955]

12 volt timer output.

+12 Volt Timer Output: A digital timer is provided that can be used to activate an ignition retardcontroller or a 2nd stage of nitrous. The output from activation terminal is on (+12 volt applied). If the activation
signal is removed, the +12V timer will halt until the signal is re-applied. The +12v timer can be programmed from
0.000 to 9.999 seconds. The Options Menu allows the user to configure the timer output behavior while the controller
is in the activated state. Optionally, the output can be configured to remain ON regardless of the activation input.
NOTE - Setting the timer to 0.000 will disable the timer output.

here is where the brown wire can be used ..
forumedel.jpg