Results 1 to 4 of 4

Thread: 7531 2 stages with tranny brake pull out timing

  1. #1
    pskowyra Guest

    Default 7531 2 stages with tranny brake pull out timing

    I am new to nitrous and to the 7531.

    I am looking to use the 1st stage off the tranny brake and pull 4.5 degrees out.
    Then time the 2nd stage for 7sec after the release of the tranny brake and pull 3 degrees more when it hits. Can my 7531 do this or do I need to add more components?

  2. #2
    msdtech1955 Guest

    Default

    yes it can ...using the brown/white wire to control the second stage.
    Attached Images Attached Images

  3. #3
    pskowyra Guest

    Default

    Do I connect the pink wire of my 7531 to pin 87 plus the positive of the solenoid on the first stage and then the violet on pin 87 on the 2nd stage and the positive of the solenoid?

  4. #4
    msdtech1955 Guest

    Default

    for the retard ...yes sir...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us