Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: timing controler, 6AL,

  1. #1
    americanhandy Guest

    Default timing controler, 6AL,

    runing a bbc, tunnel ram 2x4, 2 carb plates wet system 1 nos 1 fule solenoid fuel safety switch wot. switch, 8739 2 step, trans brake, 8680 timing control, will be using a timer [not purchsed yet] 6AL with MSD billet distributor.
    need to wire so timing adjust when timer activates after trans brake deactivates.

  2. #2
    msdtech1955 Guest

    Default

    that 8680 " will not work for nitrous" ...it is basically a timing control for towing...( the knob has to be manually turned to move the timing )

    So, there is no way to hook it to a nitrous solenoid or relay to "activate " retard when nitrous is applied.

  3. #3
    msdtech1955 Guest

    Default

    6al muti-step retard-relays-timer.
    nitrous web.jpg

  4. #4
    americanhandy Guest

    Default

    link will not open, any sugestions
    thanks

  5. #5
    msdtech1955 Guest

    Default

    shoot me an email address.

  6. #6
    americanhandy Guest

    Default

    got it to open, timer sugestions, dont want timer to start until trans brake is deactivated.

  7. #7
    americanhandy Guest

    Default

    how about this for a timer, or does MSD offer similer.
    DynoTune Nitrous Oxide Time Delay Relay Controller

  8. #8
    msdtech1955 Guest

    Default

    yes,you can use that.

    nitrous forum.gif

  9. #9
    americanhandy Guest

    Default

    Running a BBC, tunnel ram 2x4, 2 carb plates wet system 1 NOS 1 fuel solenoid fuel safety switch WOT. switch, 8739 2 step, trans brake, 8982 retard sys, will be using a timer Eddlebrock 71907 time delay relay, I have for use a MSD 8960 DPST relay and 2 DPST cube relays 6AL with MSD billet distributor.
    Need to wire so timer activates after trans brake deactivates.
    Problem I am having is NOS solenoid are hot as soon as I arm system until I activate trans brake, I want my WOT switch between solenoids and relay so I am able to throttle the engine as needed without breaking power to NOS relay.

  10. #10
    msdtech1955 Guest

    Default

    working on the drawing .
    Attached Images Attached Images

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us